Freescale Semiconductor

HCS12 HCS12 Microcontroller IC 16-Bit 25MHz 256KB (256K x 8) FLASH 112-LQFP (20x20)

16-Bit Microcontroller

Designed for automotive multiplexing applications, members of the MC9S12D-Family of 16 bit Flashbased

microcontrollers are fully pin compatible and enable users to choose between different memory

and peripheral options for scalable designs. All MC9S12D-Family members are composed of standard

on-chip peripherals including a 16-bit central processing unit (CPU12), up to 512K bytes of Flash

EEPROM, 14K bytes of RAM, 4K bytes of EEPROM, two asynchronous serial communications

interfaces (SCI), three serial peripheral interfaces (SPI), IIC-bus, an enhanced capture timer (ECT), two

8-channel 10-bit analog-to-digital converters (ADC), an eight-channel pulse-width modulator (PWM),

J1850 interface and up to five CAN 2.0 A, B software compatible modules (MSCAN12). System

resource mapping, clock generation, interrupt control and bus interfacing are managed by the system

integration module (SIM). The MC9S12D-Family has full 16-bit data paths throughout, however, the

external bus can operate in an 8-bit narrow mode so single 8-bit wide memory can be interfaced for

lower cost systems. The inclusion of a PLL circuit allows power consumption and performance to be

adjusted to suit operational requirements. In addition to the I/O ports available in each module, up to 22

I/O ports are available with interrupt capability allowing Wake-Up from STOP or WAIT mode.

Features

• 16-bit CPU12

— Upward compatible with M68HC11 instruction set

— Interrupt stacking and programmer’s model identical to M68HC11

— HCS12 Instruction queue

— Enhanced indexed addressing

• Multiplexed bus

— Single chip or expanded

— 16 address/16 data wide or 16 address/8 data narrow modes

— External address space 1MByte for Data and Program space (112 pin package only)

• Wake-up interrupt inputs depending on the package option

— 8-bit port H

— 2-bit port J1:0

— 2-bit port J7:6 shared with IIC, CAN4 and CAN0 module

— 8-bit port P shared with PWM or SPI1,2

• Memory options

— 32K, 64K, 128K, 256K, 512K Byte Flash EEPROM

— 1K, 2K, 4K Byte EEPROM

— 2K, 4K, 8K, 12K, 14K Byte RAM

• Analog-to-Digital Converters

— One or two 8-channel modules with 10-bit resolution depending on the package option

— External conversion trigger capability

• Up to five 1M bit per second, CAN 2.0 A, B software compatible modules

— Five receive and three transmit buffers

— Flexible identifier filter programmable as 2 x 32 bit, 4 x 16 bit or 8 x 8 bit

— Four separate interrupt channels for Receive, Transmit, Error and Wake-up

— Low-pass filter wake-up function in STOP mode

— Loop-back for self test operation

• Enhanced Capture Timer (ECT)

— 16-bit main counter with 7-bit prescaler

— 8 programmable input capture or output compare channels; 4 of the 8 input captures with buffer

— Input capture filters and buffers, three successive captures on four channels, or two captures on four

channels with a capture/compare selectable on the remaining four

— Four 8-bit or two 16-bit pulse accumulators

— 16-bit modulus down-counter with 4-bit prescaler

— Four user-selectable delay counters for signal filtering

• 8 PWM channels with programmable period and duty cycle (7 channels on 80 Pin Packages)

— 8-bit, 8-channel or 16-bit, 4-channel

— Separate control for each pulse width and duty cycle

— Center- or left-aligned outputs

— Programmable clock select logic with a wide range of frequencies

• Serial interfaces

— Two asynchronous serial communications interfaces (SCI)

— Up to three synchronous serial peripheral interfaces (SPI)

— IIC

• SAE J1850 Compatible Module (BDLC)

— 10.4 kbps Variable Pulse Width format

— Byte level receive and transmit

— 4x receive mode supported

• SIM (System Integration Module)

— CRG (windowed COP watchdog, real time interrupt, clock monitor, clock generation and reset)

— MEBI (multiplexed external bus interface)

— INT (interrupt control)

• Clock generation

— Phase-locked loop clock frequency multiplier

— Limp home mode in absence of external clock

— Clock Monitor

— Low power 0.5 to 16 MHz crystal oscillator reference clock

• Operating frequency for ambient temperatures TA -40°C <= TA <= 125°C

— 50MHz equivalent to 25MHz Bus Speed for single chip

40MHz equivalent to 20MHz Bus Speed in expanded bus modes.

• Internal 5V to 2.5V Regulator

• 112-Pin LQFP or 80-Pin QFP package

— I/O lines with 5V input and drive capability

— 5V A/D converter inputs and 5V I/O

— 2.5V logic supply

• Development support

— Single-wire background debug™ mode (BDM)

— On-chip hardware breakpoints

NXP Electronics components unboxing，humidity card changed color chip can used？

56800E 56F8xxx Microcontroller IC 16-Bit 60MHz 48KB (24K x 16) FLASH 44-LQFP (10x10)

Overview

The MC56F825x/MC56F824x is a member of the 56800E core-based family of digital signal

controllers (DSCs). It combines, on a single chip, the processing power of a DSP and the

functionality of a microcontroller with fast and powerful peripherals to create a cost-effective

solution. Because of its low cost, configuration flexibility and compact program code, the

MC56F825x/MC56F824x is well-suited for many consumer and industrial applications

especially advanced power conversion and motor control.

Features

•Fast, Powerful Peripherals

eFlexPWM channels

PGA-enabled ultra-fast ADCs

•Increased Processing Power

Dual Harvard-style architecture

Hybrid DSP and MCU functionality

Inter-module crossbar switch (XBAR)

•Reduced System Cost

Embedded 12-bit DAC

EEPROM emulation capability

NXP Electronics components unboxing，humidity card changed color chip can used？